Single-column hydraulic press
Single-column hydraulic press is mainly suitable for metal products stretching, forming and pressing processes. It can also process non-metallic materials, powder metallurgy products, shaft parts calibration, sleeve parts press fitting, and metal product shaping and trimming. And other processes.
★ The hydraulic press uses a built-in fast cylinder, which has a fast idle stroke speed and high production efficiency;
★ Convenient hand adjustment mechanism can adjust the indenter or the upper table to press at any position during the stroke, and can also adjust the length of the fast forward and working stroke arbitrarily during the design stroke;
★ Pressure can be adjusted steplessly according to process requirements;
★ The sturdy open structure with integral welding can keep the fuselage sufficiently rigid while having the most convenient operating space.
Parameter of single-column hydraulic press：
Item: YHD30-200
Nominal pressure: 2000KN
Maximum working pressure of liquid: 25Mpa
Maximum stroke of slider: 700mm
Maximum distance from the lower plane of the slider to the work surface: 900mm
Throat depth: 450mm
Slider speed under no load: 100mm / s
Work: 8-10mm / s
Return: 50mm / s
Worktable effective area: 900mm
Front and rear: 900mm
Height of worktable to ground: 900mm
Motor power: 15kw